PLA+
The product is modified based on PLA material, and is easy to print, in addition, it improves the toughness and layer adherence.
Diameter Size: 1.75mm
Net Weight: 1kg/spool
Introduction:
-
Description
PLA+ is an environment-friendly material, which is easy to print and has a smooth surface. Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing; Approved by FDA, safer to use; Can be used for the conceptual model, rapid prototyping.
FILAMENT PROPERTIES TABLE | |
---|---|
3D PRINTING FILAMENT | PLA+ |
DENSITY(G/CM3) | 1.23 |
HEAT DISTORTION TEMP(℃,0.45MPA) | 53 |
MELT FLOW INDEX(G/10MIN) | 5(190℃/2.16kg) |
TENSILE STRENGTH(MPA) | 63 |
ELONGATION AT BREAK(%) | 20 |
FLEXURAL STRENGTH(MPA) | 74 |
FLEXURAL MODULUS(MPA) | 1973 |
IZOD IMPACT STRENGTH(KJ/㎡) | 9 2/10 |
DURABILITY | 4/10 |
PRINTABILITY | 9/10 |
RECOMMENDED PRINTING PARAMETERS | |
EXTRUDER TEMPERATURE(℃) | 210 – 230℃ Recommended temperature:215℃ |
BED TEMPERATURE(℃) | 45 – 60°C |
FAN SPEED | 100% |
PRINTING SPEED | 40 – 100mm/s |
HEATED BED | Optional |
RECOMMENDED BUILD SURFACES | Masking paper, PVP solid glue, PEI |