Home
Shop
Wishlist0

CD4069 (CMOS Hex Inverter)

18.00 EGP

Buy Now Compare
Availability: In Stock

See in Fig below. The CD4069 consists of six inverter gate circuits in 14 DIP packets.

The manufacturer uses CMOS technology, which allows it to use a wide voltage range of 3V to 16V. Imagine, you are using 2 of 1.5V AA batteries. This IC is working. And It uses low power consumption.

Also, it has high noise immunity, and the symmetric controlled rise and fall times.

We can use them for all general inverter applications, medium-power TTL-drive. Or even logic-level-conversion capabilities of circuits. For example the CD4009. And we do not need to use CD4049/MM74C04 hex inverter and buffers.

Recommended: If you are a beginner should read CMOS characteristics before.

See the HD14069 made by Hitachi. They are equivalent to CD4069. And Connection Diagram or its pinout below.

CD4069 pinout

Sometimes you may not be able to buy CD4069. We can use other numbers instead, with the same features, MC14069, TC14069, HD14069, etc.

Look at the Schematic Diagram of CD4069 inverter gates. We can see that it consists of the structure of MOSFET N and P.

According to the principles of CMOS, it gives us a great inverter gate logic. That uses very low energy And good performance.

But It is a high impedance input. What is more?

Schematic Diagram CD4069

Static discharged protection

Have you ever worried that the CMOS is easily damaged by static electricity?  Yes, me too. But when we look at the internal structure of CD4069 above.

All input is protected from damage since the static discharged by diode clamps to VDD and VSS.

  • Logic inversion
  • Pulse shaping
  • Oscillators
  • High-input-impedance amplifiers

You are wanting to use it right?

We learn it by experimenting with creating simple circuits. you can easily assemble these circuits through the breadboard.

  • 1kHZ Clock pulse generator

The output is a square wave frequency or pulse form. And F = 1 / 1.4 RC.

Also, you can learn this circuit works here: How Astable Multivibrator using Logic Gates work

Unused input pin on CMOS to ground
  • Bounceless Switch circuit using inverter gate
Bounceless Switch circuit
  • High-Input Impedance Amplifier

If your input signals are weak. It may make the circuit work error. We need to increase it before a feed to the circuit. The easy way is using an inverter or buffer gate as a high-impedance amplifier.

In later we will see a power amplifier using a digital logic gate.

High-Input Impedance Amplifier
high input impedance buffer using CD4069

Watch out static electricity
It is one type of CMOS Digital IC. So, we should be careful about static electricity.

Protect inputs
All Unused input pin should connect to the VDD or VSS(GND). To protect CMOS work mistakes.

All Unused input pin should connect to the VDD or VSS(GND)

Read Also:

Back to Top
Product has been added to your cart