Home
Shop
Wishlist0

CC1352R Multiprotocol Sub-1 GHz and 2.4GHz Wireless Module RF-TI1352B1

850.00 EGP

Compare
Availability: Out of stock
SKU:wc-60
Description

RF-TI1352B1 module is developed based on TI CC1352R with a powerful processor of 48 MHz ARM® Cortex®-M4F. It is a multiprotocol and multi-band module supporting Thread, Zigbee®, Bluetooth® 5.1 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz). The Sub 1GHz and 2.4GHz module consists of a 48 MHz crystal, a 32.768 kHz crystal, 352 kB Flash, 256 kB ROM, an LC filter, and two IPEX connectors for 2.4 GHz and Sub-1 GHz respectively. The IPEX connector and the higher TX power enable the module to have a bigger possibility to reach a longer transmission range and achieve a better application experience. This powerful module with a DMM driver is suitable for a large range of applications such as electronic point of sale (EPOS), factory automation and control, fire safety systems, industrial security systems, etc.

TI CC1352R Multiprotocol & Multi-Band Sub-1 GHz & 2.4-GHz Wireless Module RF-TI1352B1

Two IPEX Connectors

Two IPEX connectors embedded in the multi-band module enable it to flexibly and extensively apply in both Sub 1GHz and 2.4GHz radio systems.

Long Transmission Range

Due to Sub 1GHz and 2.4 GHz frequency bands, the wireless RF module can transmit signals to farther devices and is less susceptible to interference.

Dynamic Multiprotocol Manager

It is a multi-protocol RF module that is compatible with Thread, Zigbee®, Bluetooth® 5.1 Low Energy, Wi-SUN, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, proprietary systems and concurrent multiprotocol through a DMM driver.

Serial Port Protocol

CC1352R wireless module supports Sub 1GHz and 2.4 GHz multi-protocol and can be preprogrammed with a serial interface communication protocol for Thread, ZigBee, BLE5.3 and TI 15.4-Stack (Sub 1GHz).

Parameters

Wireless SoC:

  • 48 MHz ARM® Cortex®-M4F processor
  • TX power: Up to +5 dBm
  • Sensitivity:
    • -121 dBm @ Sub GHz (Long-range Mode)
    • -110 dBm @ Sub GHz (50 kbps)
    • -105 dBm @ Bluetooth 5.0 (LE Coded PHY)
  • Memory
    • 352 kB flash
    • 256 kB ROM
    • 80 kB SRAM
  • Data Rate:
    • LE 1M PHY
    • LE 2M PHY
    • LE Coded PHY (long range)

Features:

  • IEEE 802.15.4
  • Wireless M-Bus (T, S, C, N mode)
  • 6LoWPAN
  • Wi-SUN NWP
  • Proprietary 2.4 GHz
  • Amazon Sidewalk
  • Bluetooth 5.1 Low Energy
  • ZigBee
  • Thread
  • MIOTY
  • Bluetooth mesh
  • Direction finding NCP
  • OAD

Operating Range:

  • Supply voltage range 1.8 V ~ 3.8 V
  • Working temperature range: -40 °C ~ +85 °C

Rich Peripherals:

  • ADC
  • DAC
  • UART
  • SPI
  • I²C
  • I²S
  • RTC
Related Resources:
CC1352R Multi-Protocol Dual-Band Wireless Solution
Sub-1GHz vs. 2.4 GHz: 7 Takeaways 
RF-TI1352B1 Hardware Datasheet V1.0_20230525
Back to Top
Product has been added to your cart