Description:Waterproof probe with DS18B20 sensor – 0.95 m.
The DS18B20 temperature sensor is enclosed in a sealed, waterproof housing, allowing it to measure the temperature of places away from the main controller or in wet conditions. The sensor has a temperature range up to 125 °C but the insulation is made of PVC so it is recommended to keep it below 100 °C. It communicates via a 1-Wire interface and operates with voltages from 3 V to 5.5 V. The sensor is compatible with Arduino.
The sensor is hidden in a waterproof stainless steel housing.
Waterproof probe with DS18B20 sensor – 0.95 m
The sensor communicates via a 1-Wire interface and operates with voltages from 3 V to 5.5 V. Each sensor has its own unique serial number so that multiple sensors of this type can be connected to one bus. The module allows you to select the resolution of temperature readings from 9 to 12 bits.
| Arduino compatible product
For a sample code and detailed information, see the user guide. |
Specification DFRobot – Waterproof Probe with DS18B20 – 0.95 m
- Supply voltage: 3 V to 5.5 V
- Accuracy: +/- 0.5°C
- Temperature range – measurement: from -10 °C to 85 °C
- Temperature range – operation: from -55 °C to 125 °C
- Resolution: from 9 to 12 bit
- Interface: 1-Wire
- Unique 64-bit identifier
- Question time: < 750 ms
- Cable diameter: 4 mm
- Length: 95 cm
- 3 wires interface:
- Red wire – VCC
- Black wire – GND
- Yellow wire – DATA
