PETS
PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber.
Diameter Size: 1.75mm
Net Weight：1kg/spool
Introduction:
-
Description
PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber.
- * Application
| FILAMENT PROPERTIES TABLE | |
|---|---|
| 3D PRINTING FILAMENT | PETG |
| DENSITY(G/CM3) | 1.27 |
| HEAT DISTORTION TEMP(℃,0.45MPA) | 64 |
| MELT FLOW INDEX(G/10MIN) | 20（250℃/2.16kg) |
| TENSILE STRENGTH(MPA) | 52.2 |
| ELONGATION AT BREAK(%) | 83 |
| FLEXURAL STRENGTH(MPA) | 58.1 |
| FLEXURAL MODULUS(MPA) | 1073 |
| IZOD IMPACT STRENGTH(KJ/㎡) | 4.7 |
| DURABILITY | 8/10 |
| PRINTABILITY | 9/10 |
|
RECOMMENDED PRINTING PARAMETERS |
|
| EXTRUDER TEMPERATURE(℃) | 230 – 250℃ Recommended temperature：240℃ |
| BED TEMPERATURE(℃) | 75 – 90°C |
| FAN SPEED | 100% |
| PRINTING SPEED | 40 – 100mm/s |
| HEATED BED | Required |
| RECOMMENDED BUILD SURFACES | Masking paper, PVP solid glue |
