PLA+
The product is modified based on PLA material, and is easy to print, in addition, it improves the toughness and layer adherence.
Diameter Size: 1.75mm
Net Weight: 1kg/spool
Introduction:
-
Description
PLA+ is an environment-friendly material, which is easy to print and has a smooth surface. Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing; Approved by FDA, safer to use; Can be used for the conceptual model, rapid prototyping.
| FILAMENT PROPERTIES TABLE | |
|---|---|
| 3D PRINTING FILAMENT | PLA+ |
| DENSITY(G/CM3) | 1.23 |
| HEAT DISTORTION TEMP(℃,0.45MPA) | 53 |
| MELT FLOW INDEX(G/10MIN) | 5（190℃/2.16kg） |
| TENSILE STRENGTH(MPA) | 63 |
| ELONGATION AT BREAK(%) | 20 |
| FLEXURAL STRENGTH(MPA) | 74 |
| FLEXURAL MODULUS(MPA) | 1973 |
| IZOD IMPACT STRENGTH(KJ/㎡) | 9 2/10 |
| DURABILITY | 4/10 |
| PRINTABILITY | 9/10 |
| RECOMMENDED PRINTING PARAMETERS | |
| EXTRUDER TEMPERATURE(℃) | 210 – 230℃ Recommended temperature：215℃ |
| BED TEMPERATURE(℃) | 45 – 60°C |
| FAN SPEED | 100% |
| PRINTING SPEED | 40 – 100mm/s |
| HEATED BED | Optional |
| RECOMMENDED BUILD SURFACES | Masking paper, PVP solid glue, PEI |
