The hot air gun can be used to melt materials or soften paint or plastics and is suitable for removing old layers of paint, bending plastic pipes, replacing floor tiles, and making clothes. Choosing the right temperature and optimal spacing, will not hurt anything else, it will provide the best help and satisfactory results for your work.
The strong element provides sufficient heat concentration to remove paint (can also remove paint and varnish). Designed with a built-in stand so it can be used hands-free
Useful for various applications/redecorating processes, welding processes on bronze materials. the process of defrosting from frozen conditions, installing car/other vehicle body stickers, cooking vehicle glass film, and also for repairing electronic devices and mobile phones such as opening touchscreen displays, or other parts (temperature must be adjusted so as not to damage components).
How to use the Hot Air Gun
When activated:
1. Please comply with national standards for power outlets, the working voltage of the hot air gun is 220V50HZ, the heating power is 2000W, and the adjustable temperature is 50°C-600°C.
2. First, turn the temperature adjustment knob at the low segment, then pull the switch to position 1 or 2, the motor emits a buzzing sound, then turn the temperature adjustment knob slowly adjusted to the direction of the high segment, electric wire due to heating redness, at the same time there will be some smoke or odor, this is a normal phenomenon of red hot wire. After a period of use, the front tube will become black, this is the normal phenomenon at high temperature, without any impact on the use of the hot air gun.
3. If it is found that the motor does not operate or has adverse operation fault in normal use, please immediately place the switch to position 0, and pull the plug of the power cord, then send this hot air gun with fault to the dealer or factory to repair, prohibit disassemble.
When after use:
1. If you want to stop using the hot air gun, please turn the temperature adjustment knob at the low segment, then place the switch to position 0, and put the hot air gun upright with the front tube upward, the air will make it natural cooling. When using again operate following the above second point.
2. If you want to stop using the hot air gun and store it, you should turn the temperature adjustment knob to the lower segment, let the motor blowing 20 seconds, placing the switch to position 0, this helps the hot air gun cool, then put the hot air gun upright with the front tube upward, because of this arrangement, the heating wire heat can be backward scattered and extend motor life. Only the head tube cooled to the hand can touch the hot air gun can be stored.
Specifications:
- Input: AC 220V-240V / 50Hz-60Hz
- Power: 2000W
- Variable Temperature
- Temperature: Low 50-400°C & High 50-600°C
- EU-Plug
Note:
- Never allow children to use the product
- Always ensure that the workplace is well-ventilated. Gases and vapors that occur may be harmful.
- After turning on the power of the hot air gun, operators must stay in the workspace
- Please do not blow the hot air on people directly
Package Includes:
1 x Hot-air gun
1 x Instructions Manual
