he module has six relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system allows you to control actuators with microcontroller ports or any development kit.
Specifications:
- Supply voltage VCC: 12 V
- Activated with the low-status
- Relay
- Coil voltage: 5 V
- The maximum voltage of contacts: 250 VAC, 125 VDC*
- Maximum current: 10 A
- Optoelectronic insulation
- 6 LEDs signaling the activation of relays
- The dimensions of the board are 106 x 57 x 17mm
- Weight: 82 g
- Diameter of mounting holes: 3 mm
Description
The module allows control of the actuators consuming the current up to 10 A using the microcontroller’s ports or any development kit (including Arduino, Raspberry Pi, and STM32Discovery). Optical insulation separates the control signal from the part associated with the power of the relay, thereby providing work safety for the management system.
| The product is compatible with Arduino
For relay control, sufficient is a digital control signal from the pins of the Arduino. |
Connection
For proper operation, it is sufficient to connect the power of the relay coil and the digital control signal. Leads are the standard gold in strips with a pitch of 2.54 mm, which enables connection using the popular connecting cables.
The relay has the following pins
- VCC, DC+– power supply of the optocoupler
- GND, DC- – ground of the system
- IN1 … IN6– control inputs of the relay are activated by the low-status
- Connectors KF (ARK)– the relay contacts are connected by the pattern on the board of the module.
Examples of application
- Driver of lighting
- The driver of the actuators
- Switch for electric devices, including motors
