Solder Wick CP2015 (W 2.0mm, L 1.5m) (goot -JAPAN)
FOR LEAD-FREE DESOLDERING
Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.
Features:
- High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely.
- High-quality cable with braided copper wire.
- The cable is saturated with special chlorine and quickly removes unwanted solder when using a soldering iron.
- When suctioning, only touch the soldering iron and packaging.
- Otherwise there is a risk of burns.
Specifications:
| MODEL | Width | Length |
| CP-2015 | Approx. 2.0mm | Approx. 1.5m |
How to use:
- Place the wick over the solder to be removed.Push the heated soldering iron tip onto the wick.The melted solder will be absorbed.
- Remove both the soldering wick and the soldering iron tip from the PCB.
- Use nippers to cut off the used part of the wick
