Home
Shop
Wishlist0

Thermal Grease HY510

30.00 EGP

Compare
Availability: Out of stock
SKU:t-m302
HY510 gray thermal grease, thermal paste
Product Description

HY510 gray thermal conductive silicone grease, this type of silicone grease is added with high thermal conductivity graphite powder, metal powder and other substances to achieve better thermal conductivity. This product is widely used in gap filling between CPU and radiator, high-power diode, triode, thyristor element, and heat transfer at the thin seam in contact with the substrate. Graphite thermal grease uses the high thermal conductivity of graphite to fill the gap between the IC or triode and the heat sink, increasing the contact area between them, and achieving a good heat dissipation effect.

Features:
  • Graphite thermal grease, thermal conductivity 1.93W/mk
  • Strong insulation performance, withstand voltage above 10,000 volts
  • Low thermal resistance, long-lasting paste state
  • The working temperature range is wide, and the performance is stable in the environment of -30°C-280°C
  • High thermal performance, cost-effective
Product parameters
project HY510 unit
color grey no
Thermal conductivity >1.93 W/mk
thermal resistance <0.225 °C-in²/W
proportion >2 g/cm³
viscosity 1000 no
concentration 380±10 1/10mm
Instantaneous temperature resistance -50~300
Operating temperature -30~280

Element

Silicon compound 50 %
carbon compound 30 %
oxidized metal compound 20 %
Applications
  • Modules with high thermal conductivity requirements
  • Cooling device between chassis or frame
  • High-speed large storage drive
  • car engine control
  • Hard Disk Drive and DVD Drive
  • power conversion equipment
  • High power LED
  • Laptops and Desktops
  • network communication equipment
  • Household appliances, electronic components, electricians, etc.
Product instructions
  1. First clean the surface of the CPU core and heat sink, the surface is clean and oil-free.
  2. Determine the area on the heat sink that is in contact with the CPU, use a scraper to pick up half a grain of rice-sized thermal grease and transfer it to the core of the CPU, and then use a scraper to spread it evenly, so that the thermal grease at the bottom of the radiator is evenly spread over the entire surface In the area in contact with the CPU, the thickness of thermal grease is about the thickness of a piece of ordinary paper.
  3. Confirm that there are no foreign objects on the base of the heat sink and the surface of the CPU core, and put the heat sink on the CPU. At this time, only light pressure can be used, and the heat sink cannot be rotated or translated. Otherwise, it may cause uneven thickness of the thermal grease between the radiator and the CPU.
  4. Fasten the buckle and call it a day.
Product Storage

Can be stored at room temperature

Back to Top
Product has been added to your cart